A
-
Abbasi, Seyed Mahdi
Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2024, Pages 65-76]
-
Abbasi Dareh Bidi, Hadis
High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
-
Abbasi Mobarakeh, Hamidreza
Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
-
Afshari, Davood
Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2024, Pages 53-64]
-
Afshari, Hossein
Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube [Volume 10, Issue 3, 2023, Pages 18-33]
-
Aghababaei, Amir
Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
-
Ahmadi, Fateme
Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2024, Pages 16-28]
-
Akbari, Davood
Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2024, Pages 44-56]
-
Akbari, Mostafa
Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
-
Akhondzadeh, Adly
Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2024, Pages 65-76]
-
Akhoundi, Behnam
Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2024, Pages 48-61]
-
Ali Askari, Kamyab
Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2024, Pages 19-43]
-
Alizadi Balegh, Karim
Study of the cyclic extrusion–compression in production of high stringed and ultrafine grained AM60 Magnesium noncircular thin section beams [Volume 10, Issue 5, 2024, Pages 1-18]
-
Ameri, Sara
Experimental study and improving the manufacturing process of brass wire in wire-cut machining [Volume 10, Issue 5, 2024, Pages 79-91]
-
Amirian, Ghasem
Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2024, Pages 17-26]
-
Arabgol, Fatemeh
Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
-
Arabqomi, Hamid
Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2024, Pages 62-77]
-
Asadi, Parviz
Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
-
Asadi, Parviz
Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2024, Pages 57-67]
-
Asadi Borujeni, Behroz
Fabrication of polyethylene glycol composite with silicon carbide scaffold for use in bone tissue engineering [Volume 10, Issue 3, 2023, Pages 9-17]
-
Ashrafi, Amir
Experimental and numerical study of the hydroforming process of copper-aluminum double layered tube [Volume 10, Issue 3, 2023, Pages 18-33]
-
Azimpour Shishevan, Farzin
Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2024, Pages 40-52]
B
-
Bani Mostafa Arab, Nasrollah
Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2024, Pages 68-78]
-
Baraheni, Mohammad
Enhancing dimensional accuracy of the produced holes in CFRP by ultrasonic vibration assistance [Volume 10, Issue 3, 2023, Pages 1-8]
-
Bazhian, Maziyar
Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
D
-
Dadgar Asl, Yaghoub
Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2024, Pages 68-78]
-
Danesh, Mahdi
Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
-
Deilami Azodi, Hamed
Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
-
Delfani, Iman
Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2024, Pages 27-36]
E
-
Eftekhari Shahri, Seyyed Ehsan
Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
-
Elahi, Seyed Hossein
Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
-
Elyasi, Majid
Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2024, Pages 29-39]
-
Entezarian, Mohammad Mahdi
Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2024, Pages 53-64]
-
Etemadi haghighi, Shahram
Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2024, Pages 19-43]
-
Ezzati, Morteza
Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
F
-
Farrokhabadi, Amin
Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2024, Pages 62-77]
G
-
Ghasemi, Arash
Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2024, Pages 65-76]
-
Ghasemi, Hamid
Strength analysis of long edge freight wagon underframe using finite element method [Volume 10, Issue 4, 2024, Pages 27-36]
-
Golbaz, Sepehr
Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
-
Golzar, Mohammad
Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2024, Pages 44-56]
H
-
Hajialimohammadi, Alireza
Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
-
Hamdollahzade, Amir Hosein
Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2024, Pages 1-15]
-
Hashemi, Ramin
Experimental study and improving the manufacturing process of brass wire in wire-cut machining [Volume 10, Issue 5, 2024, Pages 79-91]
-
Hashemi, Seyed Jalal
Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
-
Honarpisheh, Mohammad
Simulation study of the effect of different channel and curvature angles on the effective strain and process load in the tubular channel angular pressing (TCAP) process using a trapezoidal channel cross-section [Volume 10, Issue 1, 2023, Pages 30-37]
-
Hosseini, Shahram
Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
I
-
Izadi, Hadi
Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
J
-
Jabbari Mostahsan, Amirhossein
Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
-
Jafarzadeh, Hossein
Study of the cyclic extrusion–compression in production of high stringed and ultrafine grained AM60 Magnesium noncircular thin section beams [Volume 10, Issue 5, 2024, Pages 1-18]
-
Jalil, Alireza
Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2024, Pages 68-78]
-
Jandaghi Shahi, Vahid
Enhancing dimensional accuracy of the produced holes in CFRP by ultrasonic vibration assistance [Volume 10, Issue 3, 2023, Pages 1-8]
K
-
Karafi, Mohammad Reza
Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2024, Pages 44-56]
-
Karevan, Mehdi
High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
-
Karimi, Zahra
Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2024, Pages 57-67]
-
Karimi Ivanaki, Moahmmad
Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2024, Pages 53-64]
-
Kashfi, Mohammad
An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2024, Pages 37-47]
-
Khodakarami, Mohammad
Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
-
Khosravi Farsani, Ayoub
Fabrication of polyethylene glycol composite with silicon carbide scaffold for use in bone tissue engineering [Volume 10, Issue 3, 2023, Pages 9-17]
-
KianiMajd, Mehdi
Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
M
-
Maghsoudpour, Adel
Simulation and optimization of molding process parameters of ployetherimide parts by Taguchi-grey relational analysis combined method [Volume 10, Issue 5, 2024, Pages 19-43]
-
Majzoobi, Gholamhossein
An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2024, Pages 37-47]
-
Maleki, Hossein
Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2024, Pages 57-67]
-
Mashayekhi, Ahmad
Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2024, Pages 48-61]
-
Mazidi, Abbas
Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2024, Pages 17-26]
-
Mirnia, Mohammad Javad
Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
-
Mirzamohammadi, Sadegh
Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
-
Moallemzadeh, Alireza
Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
-
Modanloo, Vahid
Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2024, Pages 48-61]
-
Modanloo, Vahid
Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2024, Pages 29-39]
-
Modaresinia, Hasan
Experimental investigation on mechanical properties affected by dissimilar friction stir spot welding of aluminum 6061-T6 alloy to copper [Volume 10, Issue 6, 2024, Pages 53-64]
-
Mohammadi, Aminollah
Investigation of material removal rate and surface quality of super clear crystal glass workpiece in the ultrasonic machining process [Volume 10, Issue 1, 2023, Pages 1-10]
-
Mollaei Dariani, Bijan
Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
-
Moradzadeh, Vahid
Investigating the effect of fiber angle on the quality of the surface and delamination in the turning of epoxy composite reinforced with glass fiber [Volume 10, Issue 2, 2023, Pages 14-21]
-
Morakabati, Maryam
Effect of gradient temperature on the microstructural evolution of Nitronic 50 austenitic stainless steel thick ingot during hot rolling [Volume 10, Issue 6, 2024, Pages 65-76]
N
-
Naderi, Malek
Analysis of the effect of the hot stamping process on mechanical properties of 7075 aluminum alloy sheet [Volume 10, Issue 5, 2024, Pages 68-78]
-
Nakhaei, Mohammad Reza
Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2024, Pages 1-15]
-
Nikandish, Pezhman
Presenting the mathematical model of the variable flow rate axial piston pump with the displacement control valve [Volume 10, Issue 4, 2024, Pages 1-16]
-
Niksirat, MirMeysam
Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
P
-
Purhaji, Mohammad
Optimizing the mechanical properties of PVC/NBR/Graphene nanocomposite for achieve maximum tensile strength and elongation at break [Volume 10, Issue 6, 2024, Pages 1-15]
R
-
Rahimi, Gholamhosein
Analysis of crack behavior caused by corrosion in metal vessel repaired with composite under monotonic loading [Volume 10, Issue 3, 2023, Pages 34-42]
-
Rahimi Asiabaraki, Hossein
Investigating the effect of the passes number and changing the tool rotation direction on the distribution of reinforcing particles in the FSP [Volume 10, Issue 2, 2023, Pages 7-13]
-
Rahimi Asiabaraki, Hossein
Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2024, Pages 40-52]
-
Rahmani, Farzad
Investigation of Effect of Process Parameters on Protrusion Height of Branched Parts in Tube Hydroforming [Volume 10, Issue 1, 2023, Pages 38-48]
-
Rahmatinejad, Bahman
Comparison of dynamic behavior of steel and aluminum materials with epoxy composite reinforced with carbon and glass fibers by FEM [Volume 10, Issue 6, 2024, Pages 40-52]
-
Raiat Roknabadi, Alireza
Experimental study of the effect of ultrasonic waves on the parameters of the electrochemical deburring process [Volume 10, Issue 2, 2023, Pages 1-6]
-
Ronaghi, Alireza
Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
-
Roohol amini Ahangar, Meghdad
Experimental and numerical investigation of energy absorption capability of holed thin-walled circular aluminum tubes under axial compression loading [Volume 10, Issue 6, 2024, Pages 29-39]
S
-
Sabet, Seyed Alireza
Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
-
Sadeghi, Mohammad
Experimental investigation of the effect of ultrasonic welding parameters on the strength and weldability of GF/PA6 thermoplastic composites [Volume 10, Issue 5, 2024, Pages 44-56]
-
Safi Jahanshahi, Amin
Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2024, Pages 48-61]
-
Saghafi, Hamed
Investigating the effect of thermal preloading of glass fiber fabric on changes in the mechanical behavior of glass fiber/polyester composite plates [Volume 10, Issue 1, 2023, Pages 11-19]
-
Sarkhosh, Reza
Experimental investigation of mechanical and electrical properties of semi-biodegradable polypropylene/hemp woven thermoplastic composite [Volume 10, Issue 4, 2024, Pages 62-77]
-
Sedehi, Sayyed Mohammadreza
Studying the effects of preheat temperature on the turning process of CK45 steel [Volume 10, Issue 2, 2023, Pages 22-32]
-
Sedghi, Arman
Effect of weight percentage of alumina on mechanical properties of nanocomposite produced by additive manufacturing method of digital light processing [Volume 10, Issue 5, 2024, Pages 57-67]
-
Sedighi, Mohammad
Effect of magnesium particle size on compressive strength of Mg/Hydroxyapatite porous bio-composite [Volume 10, Issue 2, 2023, Pages 33-40]
-
Shahverdi, Hamidreza
Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2024, Pages 16-28]
-
Shirafkan, Ali
An experimental study on the influence of temperature and strain rate on the mechanical properties and delamination of GLARE 2/1 under bending load [Volume 10, Issue 4, 2024, Pages 37-47]
-
Shirazi, Reza
Designing and manufacturing of a heavy equipment rotary table equipped with PLC control [Volume 10, Issue 3, 2023, Pages 43-53]
-
Soltani, Sadegh
Numerical investigation of deformation behavior of aluminum beams reinforced with aluminum foam [Volume 10, Issue 1, 2023, Pages 49-58]
T
-
Taghipour Lahijani, Yasser
Identifying the mechanical properties of chromium nanobeams with artificial bee colony optimization method based on large deflection analysis with surface effects [Volume 10, Issue 4, 2024, Pages 48-61]
-
Talebi-Ghadikolaee, Hossein
Investigating the effect of flexible forming process variables on the uniformity of thickness distribution in U-Shaped Micro-channels [Volume 10, Issue 2, 2023, Pages 41-48]
Z
-
Zabihi Gargari, Mohammad
Investigating the microstructure, mechanical properties and hole expansion of advanced high strength steel with the approach of application in the car body [Volume 10, Issue 6, 2024, Pages 16-28]
-
Zahedi Dizajyekan, Ali
Numerical and experimental analysis of damage in the single point incremental forming of Aluminum/Copper bilayer sheet [Volume 10, Issue 1, 2023, Pages 20-29]
-
Zare, Vahid
Vibration analysis of the wire tool in wire-cut EDM [Volume 10, Issue 4, 2024, Pages 17-26]
-
Zeinali, Mohammad
High energy absorbent Polyester/Natural Kenaf based polymer micro-composites [Volume 10, Issue 3, 2023, Pages 54-61]
Your query does not match with any item